 |
 |
The InTheGroove MKII is a state of the art passive phono-amplifier that features
completely independent left and right channel operation, designed for both MC and MM phono cartridges.The very refined sound follows the Pathos tradition of great soundstage, high realism, transparency, dynamics and musicality. it is powered by batteries in order to provide as clean and stable power as possible. Since the output from the pick-up is low, the risk of “disturbing” the signal is higher. By using batteries in the power supply the risk of interference is minimised — the power is extremely stable and thereby avoids the turbulence that often appears on the mains net.
High sound quality is further improved by using selected components of highest quality and balanced mode operation. Balanced layout is something rarely seen in phono amplifiers — but it has the advantage of lower noise and therefore a cleaner signal. The input-stage is the most critical in a phono-amplifier, and InTheGroove’s first gain stage uses JFETs to ensure the lowest possible input random noise. After the JFET input stage the very finest opamps handle the signal and ensure the correct gain. Together these initiatives ensure high gain, low noise and a peerless sound.
Gain is user-selectable with an additional 20dB. The built in charger makes it easy to use and set-up. After a period with no signal it will switch off automatically and recharge if the batteries are low. This guarantees the longest battery life. The variety of adjustments allows your cartridge to perform at its best.
Main Specifications:
Type: passive RIAA in pure Class A powered by batteries.
Input state by low noise transistors
Balanced output
Gain 60dB + possibility of adding another 20dB.
Charger built in, automatic stand-by.
Frequency response: 10Hz-100 KHz
S/N ration: 80dB @1KHz/5cm/s
Input impedance: MM 47KOhm/47pF MC 100Ohm/1nF
completely independent left and right channel operation, designed for both MC and MM phono cartridges.The very refined sound follows the Pathos tradition of great soundstage, high realism, transparency, dynamics and musicality. it is powered by batteries in order to provide as clean and stable power as possible. Since the output from the pick-up is low, the risk of “disturbing” the signal is higher. By using batteries in the power supply the risk of interference is minimised — the power is extremely stable and thereby avoids the turbulence that often appears on the mains net. High sound quality is further improved by using selected components of highest quality and balanced mode operation. Balanced layout is something rarely seen in phono amplifiers — but it has the advantage of lower noise and therefore a cleaner signal. The input-stage is the most critical in a phono-amplifier, and InTheGroove’s first gain stage uses JFETs to ensure the lowest possible input random noise. After the JFET input stage the very finest opamps handle the signal and ensure the correct gain. Together these initiatives ensure high gain, low noise and a peerless sound.
Gain is user-selectable with an additional 20dB. The built in charger makes it easy to use and set-up. After a period with no signal it will switch off automatically and recharge if the batteries are low. This guarantees the longest battery life. The variety of adjustments allows your cartridge to perform at its best.
Main Specifications:
Type: passive RIAA in pure Class A powered by batteries.
Input state by low noise transistors
Balanced output
Gain 60dB + possibility of adding another 20dB.
Charger built in, automatic stand-by.
Frequency response: 10Hz-100 KHz
S/N ration: 80dB @1KHz/5cm/s
Input impedance: MM 47KOhm/47pF MC 100Ohm/1nF